# `lb`

[MIPS Documentation](https://asm-editor.specy.app/documentation/mips.md) › [Instructions](https://asm-editor.specy.app/documentation/mips/instruction.md)

Web page: https://asm-editor.specy.app/documentation/mips/instruction/lb

**Load byte (sign-extended)**

Category: Load and store

Loads one byte from the address in the second register plus an offset into the first, sign-extended to 32 bits.

Used in: [Loads, stores and immediates](https://asm-editor.specy.app/learn/courses/mips/introduction/loads-stores-and-immediates.md) (MIPS assembly)

## Forms

- `lb $t1, imm16($t2)`

## Pseudo-instructions

The processor does not have these forms. The assembler replaces each of them with one or more real instructions. Open a row to see them.

- `lb $t1, %lo(label)($t2)` · Read from label's address, reached through the %hi already in $t2
  - `lb $t1,%lo(label)($t2)` → `lb $t1, lo(label)($t2)`

Set $t1 to sign-extended 8-bit value from effective memory byte address

- `lb $t1, ($t2)`
  - `lb $t1,($t2)` → `lb $t1, 0($t2)`
- `lb $t1, imm`
  - `lb $t1,-100` → `lb $t1, imm($zero)`
  - `lb $t1,100` → `ori $at, $zero, imm`; `lb $t1, 0($at)`
  - `lb $t1,100000` → `lui $at, hi(imm)`; `lb $t1, lo(imm)($at)`
- `lb $t1, imm($t2)`
  - `lb $t1,100($t2)` → `ori $at, $zero, imm`; `addu $at, $at, $t2`; `lb $t1, 0($at)`
  - `lb $t1,100000($t2)` → `lui $at, hi(imm)`; `addu $at, $at, $t2`; `lb $t1, lo(imm)($at)`
- `lb $t1, label`
  - `lb $t1,label` → `lui $at, hi(label)`; `lb $t1, lo(label)($at)`
- `lb $t1, label($t2)`
  - `lb $t1,label($t2)` → `lui $at, hi(label)`; `addu $at, $at, $t2`; `lb $t1, lo(label)($at)`
- `lb $t1, label+imm32`
  - `lb $t1,label+100000` → `lui $at, hi(label+imm32)`; `lb $t1, lo(label+imm32)($at)`
- `lb $t1, label+imm32($t2)`
  - `lb $t1,label+100000($t2)` → `lui $at, hi(label+imm32)`; `addu $at, $at, $t2`; `lb $t1, lo(label+imm32)($at)`

## Operands

- `$t1`: Any general-purpose register, `$0` to `$31`, using its numeric or named spelling, such as `$8` or `$t0` (`$zero` is `$0`; `$ra` is `$31`).
- `imm16`: A signed 16-bit immediate, `-32768` to `32767`.
- `$t2`: A general-purpose register. It may be the same register as `$t1`.
- `label`: A named address in the program, such as the start of a loop or a variable in `.data`.
- `imm`: An immediate value: a signed 16-bit value (`-32768` to `32767`), an unsigned 16-bit value (`0` to `65535`) or a 32-bit value (`-2147483648` to `4294967295`). The size your value needs decides which real instructions the assembler uses. Open the row to see them for each size.
- `imm32`: A 32-bit immediate, `-2147483648` to `4294967295`. A pseudo-instruction that takes one uses the register `$at` as a temporary, so `$at` loses the value it held.

## Description

A byte with value 0xFF becomes -1 (0xFFFFFFFF) in $t1. Use 'lbu' if you want zero-extension (0 to 255 range).

## Example

```mips
.data
value: .byte 0xFF
.text
# Load byte 0xFF. Inspect $t0: 0xFFFFFFFF (-1) with sign extension.
la $t1, value
lb $t0, 0($t1)
```
