# `lwc1`

[MIPS Documentation](https://asm-editor.specy.app/documentation/mips.md) › [Instructions](https://asm-editor.specy.app/documentation/mips/instruction.md)

Web page: https://asm-editor.specy.app/documentation/mips/instruction/lwc1

**Load word to FP register**

Category: Floating point

Loads the 32-bit value at the address in the second register plus an offset directly into the first, an FP register.

## Forms

- `lwc1 $f1, imm16($t2)`

## Pseudo-instructions

The processor does not have these forms. The assembler replaces each of them with one or more real instructions. Open a row to see them.

- `lwc1 $f1, %lo(label)($t2)` · Read from label's address, reached through the %hi already in $t2
  - `lwc1 $f1,%lo(label)($t2)` → `lwc1 $f1, lo(label)($t2)`

Set $f1 to 32-bit value from effective memory word address

- `lwc1 $f1, ($t2)`
  - `lwc1 $f1,($t2)` → `lwc1 $f1, 0($t2)`
- `lwc1 $f1, imm`
  - `lwc1 $f1,-100` → `lwc1 $f1, imm($zero)`
  - `lwc1 $f1,100000` → `lui $at, hi(imm)`; `lwc1 $f1, lo(imm)($at)`
- `lwc1 $f1, imm32($t2)`
  - `lwc1 $f1,100000($t2)` → `lui $at, hi(imm32)`; `addu $at, $at, $t2`; `lwc1 $f1, lo(imm32)($at)`
- `lwc1 $f1, label`
  - `lwc1 $f1,label` → `lui $at, hi(label)`; `lwc1 $f1, lo(label)($at)`
- `lwc1 $f1, label($t2)`
  - `lwc1 $f1,label($t2)` → `lui $at, hi(label)`; `addu $at, $at, $t2`; `lwc1 $f1, lo(label)($at)`
- `lwc1 $f1, label+imm32`
  - `lwc1 $f1,label+100000` → `lui $at, hi(label+imm32)`; `lwc1 $f1, lo(label+imm32)($at)`
- `lwc1 $f1, label+imm32($t2)`
  - `lwc1 $f1,label+100000($t2)` → `lui $at, hi(label+imm32)`; `addu $at, $at, $t2`; `lwc1 $f1, lo(label+imm32)($at)`

## Operands

- `$f1`: Any floating-point register, `$f0` to `$f31`.
- `imm16`: A signed 16-bit immediate, `-32768` to `32767`.
- `$t2`: Any general-purpose register, `$0` to `$31`, using its numeric or named spelling, such as `$8` or `$t0` (`$zero` is `$0`; `$ra` is `$31`).
- `label`: A named address in the program, such as the start of a loop or a variable in `.data`.
- `imm`: An immediate value: a signed 16-bit value (`-32768` to `32767`) or a 32-bit value (`-2147483648` to `4294967295`). The size your value needs decides which real instructions the assembler uses. Open the row to see them for each size.
- `imm32`: A 32-bit immediate, `-2147483648` to `4294967295`. A pseudo-instruction that takes one uses the register `$at` as a temporary, so `$at` loses the value it held.

## Description

Typically used to load a single-precision float from memory. Address must be word-aligned.

## Example

```mips
.data
value: .float 3.5
.text
# Load the initialized value. Inspect $f0: raw bits 0x40600000.
la $t0, value
lwc1 $f0, 0($t0)
```
